AQUALINE PLUMBING, ELECTRICAL & Heating LLC

aqualine plumbers electricians heating Bothell WA

CALL US TODAY ON:

(425) 943-9157

Location:

Bothell, WA

Common Causes Of Odours From Furnaces

9/27/2018

Whenever you switch on the furnace, you can expect a breeze of warm air to begin regulating your house's indoor temperature immediately. What you might not be thinking of is range of odd smells which waft in as the furnace operates.
Heating units can give strong and strange smells off. A few of such odors will solve by themselves and should not cause you any worries, while others can indicate a potentially hazardous issue with furnace. Identifying the probable cause of scent can assist you take right steps for freshening your air.
Below are the most common causes of any abnormal furnace odor.
Cracked Components
The furnace as a system may last for considerably longer than a few of its individual parts. For example, lots of furnaces suffer a cracked heat exchanger. When the heat exchanger gets damaged, gap releases chemical smell which can resemble formaldehyde. Get your heat exchanger replaced immediately since this problem can result in furnace inefficiency, carbon monoxide problems and fires.
Damp
If the furnace sits in damp parts of your home, this moisture might settle on the system. When furnace turns on as well as gets hot, the dampness starts to burn off and that can create smell of dampness all through your house. Luckily, this smell should resolve itself when the furnace carries on to run.
Excess of Dust
During off-season, dust might collect on and in your furnace. When you start to heat your house for the very first time in the year, your furnace likely will burn the dust. If heated air smells like dusty for short time period, the odor must dissipate quickly. You also can avoid this smell by simply dusting the furnace off before turning it on.
Gas Leakages
Natural gas utilized for heating is generally treated with sulphur in order to offer it its rotten egg smell. The odor is designed to alert the homeowners to prospective gas leakages as quickly as probable. If you smell the sulphur, leave that area and contact a heating expert technician along with your gas company.

Heating Bothell

Intake Contamination
Lots of furnaces intake air from the home’s outside. Anything that’s within proximity to the intake system can potentially alter characteristics of the heated air. For instance, if the furnace smells similar to sewage, that odor probably comes from sewer system opening which is near the intake system.
Obstructions
If your heating unit becomes obstructed, one among the very first signs you're probable to see is change in the air smell. The kind of obstruction determines resulting odor. For instance, a blocked chimney might make the furnace smell as if it is smoking, while any pest struck in your system will smell like a decay. Usually, you'll have to turn the system off and have it evaluated to resolve these problems without the risks of incorrect furnace venting.
Overheating
Along with gas leak-related smells, you should never ignore electrical, sparking or hot metal odors. Such smells generally indicate a problem with overheating and might point to a defective auto-shutoff.
Old Filters
The furnaces are outfitted with inner filters that assist regulate the quality of air in your house. Over the years, the filter can get clogged with debris and dirt. Not just can a clogged air filter affect efficiency of your heating unit, but you also may smell the obstruction too.
An older furnace filter might smell somewhat as motor oil. But, you must be alert that if changing filter doesn’t get rid of smell, the system could have serious oil leakage, which needs professional attention by Bothell Heating.

When You Should Change Filter Of Your Furnace?

9/24/2018

At first, you might not believe that it’ll make much of difference if you change the furnace filter.
However, knowing when you should change the furnace filter is one of the most tedious job.For this you can take help from Heating Bothell and they will assist you to keep the quality of your air high and furnace working at best.
Check The Furnace Filter In Every 30 Days
One general industry standard to check your furnace air filter is doing it each month. If it’s needed, replace or clean it.
It is recommended that your furnace’s filter should be cleaned or changed in every 3 months at least. Based on your home and your furnace, it may need cleaning or changing on a more often basis.
The Factors That Will Impact When Should You Change The Furnace Filter
There are a few factors that will decide how frequently you must change your furnace’s filter.
Is Your Filter Dirty Always When You Check that?
Are you changing filter in every 3 months, and discovering it to be absolutely packed with debris and dirt? This is an indication that you might have to change it often, especially if you wish for your furnace to work very well.
A blocked filter can cause your heating unit to work harder, attempting to push air through all buildup and back in the house. It causes more wear, not to state reduced efficiency. To put simply, a blocked air filter can increase your operating cost!
If it sounds familiar, check your air filter frequently. The most excellent way to tell if it’s time to change the filter, it’s to hold it up as well as check if you can see any light passing through it. If not, then change the filter.

Heating Bothell

People and Pets Will Kick More Dust
One among the reasons why your filter may have to be changed frequently is dependent on how many friends you’ve running around.
People and pets are a few of the largest culprits when dust and debris are considered. Pets with furs shed, and it quickly gets sucked up in furnace filter. So, the more is there, the faster your heating unit’s filter will block.
People are not blameless either. When you move around, you spread skin and hair cells around, kick up dust, and leave a nearly invisible mess generally wherever we go. In case you are in a house with lots of people, you might have to change the furnace filter at frequent intervals.
Do You Have Asthma or Allergies?
While a sparkling new air filter isn’t scientifically proven to assist with air quality in the house, it definitely does not hurt it. The purpose of filter is to eradicate debris and dust in order that it not just protects the heating unit from bigger particles, but also removes them from air.
A blocked filter won’t be capable to do its work nearly too, which means that more dust will be hanging around. In case you have any allergies, this can be a poor combination. Changing or cleaning your filter more frequently could help decrease the possibilities that your house will make you ever sneeze. You also might wish to consider about investing into more heavy duty filters with air cleaning feature.
How Much You Use Your Unit?
This one is quite simple; more you run the furnace, the quicker your filter will get blocked. If you keep temperature higher in the winter season, your furnace needs to work harder.
Possibilities are with freezing winters, your heating equipment is running continuously during these seasons. The more time it runs, more dust it is collecting. More dust it is collecting, the more frequently you must check it and, if needed, change your filter.

How To Prepare Your Furnace For Winters?

9/20/2018

Before winter season, you’ll need to make sure that your heating unit is functional, safe to use, and energy-efficient. You won’t want to turn the furnace on during that very first cold day to find out that it is not working properly. It’s important to note down that during warmer months, lots of things take place that can affect a heating unit.
Below are a few tips and very helpful insights on heating unit service that will assist you save your money, and stay hot during colder season.
Schedule to Clean The Heating Unit Early Before Winter Months
The professional companies are very busy usually during onset of winter period. Hence, it is a good idea always to schedule heating system’s maintenance for winters before time. Hiring the service of an expert to clean as well as service the heating unit is the most excellent way to save money in long run.
You could be certain that the unit cleaned by Heating Bothell will work more efficiently and better always. To choose a good professional for the work, you can search for companies accredited by the Better Business Bureau (BBB) with A+ rating.
Check and Change Heating Unit’s Filter
Before winter season, please make sure that you check conditions of your eating unit’s filter. You may consider changing filter before winter period starts. This will make sure that your heating unit will function efficiently come winter.
Switch Your Thermostat to Heating From Cooling
When doing heating unit’s troubleshooting, you’ll need to confirm whether your furnace’s thermostat is now in proper condition. You can easily confirm this by turning your furnace thermostat to heating from cooling.
Inspect Chimney of Your Heating Unit
Check for any obstruction in furnace chimney like debris and bird nests. Ensure to check if there’s a noteworthy buildup of soot inside the furnace chimney. The soot buildup in the chimney could be a very risky fire hazard. In the case your furnace chimney hasn’t been inspected since a long time, then consider calling an expert to check as well as clean it.

Heating Bothell

Ensure That the Heating Unit’s Burner is Free of Debris and Dust
Usually, debris and dust can gather on the heating unit’s burners during summer. Therefore, you must consider cleaning burners before winter period begins. When cleaning burners, take a note of any sign of rust and misalignment.
Consider Oiling the Heating Unit Blower if Required
When preparing your heating unit for winters, you should ensure that all components of your system are completely clean and in proper working condition. Generally, the furnace’s blower motor plays huge role in effectiveness and efficiency of the heating system. Hence, it must be oiled once a year at least to enhance on its performance and avoid any unusual noise when working.
Ensure the Thermostat is Correctly Functioning
The thermostat determines efficiency of furnace unit. Therefore, if thermostat isn’t working properly, the heating unit might not be working effectively. To check if thermostat is working effectively, turn your furnace thermostat on and see how it replies. It should start without any issue always. In case you’ve an old, manually-operated thermostat, you must consider updating that. Set-back thermostat enables you to control room temperature completely of your house; thus, they are the most excellent choice. Additionally, a set-back thermostat could be automatically turned down whenever you are asleep or are away. You’ll save lots of money by utilizing this kind of thermostat.
Ensure All The Heating Vents Are Uncovered Completely
Always double-check the heating vents to make sure that there’s nothing blocking them. The blocked vents not just avoid heat from getting outside but also drive the heating up. Thus, a blocked vent could result in an overheated heating unit.

Do You Really Need A Surge Protector?

8/24/2018

A surge protector is a device that is used to protect your expensive electronic devices from the damage caused by the voltage surges.Call Electrician Bothell for installation of surge protector for your home.
How does it work?
When the voltage in your home increases beyond the normal it is called a voltage surge. Voltage surge heats up the wire and burns it. It also damages your appliances. The surge protector works to detect and control this voltage surge. It detects the high voltage and deviates this excess electricity in grounding wire. It’s important to plug in your surge protector to a grounded outlet.
What causes voltage surges?
We all know that lightning causes the power surges but it is not the sole reason for voltage spikes. Electrical devices that consume too much of power are also responsible for the voltage surge. When these devices are turned on, they drain a lot of electricity which causes the surges. You must have noticed the flicker in your lights when any big appliance that consumes a lot of energy is turned on or off.
When and where to use a surge protector?
Voltage surges are not predictable so it’s important that you use a surge protector all the time. The surge protector should be used for the expensive appliances like computer, televisions etc. A surge protector is also helpful in organizing the wires clutter. This organization will make your cables easy to handle.
How to find a right surge protector for your home?
Most of the people lack the knowledge of the surge protectors, so it is imperative that you gain little information before buying one. There are few of the features that you should be looking for while buying a surge protector:

  • Indicator lights- It’s not always the appliances that can get damaged by the voltage surge, sometimes a surge protector can also be damaged. If there is an indicator light on it, it gets easier to detect the faulty surge protector. Using a faulty surge protector will risk your expensive appliances
Electrician Bothell
  • Joule rating – This is the measure of the maximum amount of the voltage that a surge protector can divert. Voltage surge beyond that level will make the surge protector useless. The higher the joule rating, the more is the capacity of a surge protector to divert the energy. A surge protector with a joule rating of at least 600 should be used for the home.
  • UL rating – This is a rating given by the underwriter's laboratories in order to test the safety of electrical devices. Always choose a surge protector with good UL rating.
  • Action time- A surge protector should not take too long to respond to the voltage surges. A surge protector having fast response time will expose your appliances to voltage surges for less duration. It’s best to get a surge protector with response time less than 1 nanosecond.
  • Clamping voltage- A surge protector with low clamping voltage will set off earlier in comparison to the protectors having high clamping voltage. Clamping voltage is the amount of voltage on which your surge protector will trigger off. Lower clamping voltage is good to keep your appliances safe.
  • A number of ports – Surge protectors come with varying number of ports. Some have six or eight ports and others have as many as twelve ports. Check your requirement and then buy one which is suitable to your needs.
  • Warranty- There are few manufacturers who offer the warranty for the devices connected to their surge protectors. If any damage is done or the surge protector fails to function properly, you can file a claim against the damage occurred.​

Plumbing Fixes You Should Know

8/14/2018

If any appliance starts leaking or a pipe bursts, you cannot afford to wait for any time period for a plumber to come. Water is pouring outside everywhere now! Below are some quick, easy fixes you can perform to minimize damages. These simple solutions might not look like much, however they can save you hundreds in damages!
Leaky Pipes
Regardless of how small any pipe leakage, you just do not want water pouring outside into your house. Unaddressed leaks grow, too, so minor problems will not stay small for very long. Fortunately, there are lots of plumbing tools intended to assist you make fast fixes to prevent disasters. Whatever you will go with, begin by turning the water off and measuring leaking pipe’s circumferences.
Go to nearest hardware store and buy an epoxy compound in case you’ve iron pipes, or pipe wrap or clamp if not. You need to apply epoxy onto leaking pipe directly, like you’d with plumber’s putty or caulk. Epoxy will form a seal temporarily over the leakage. Wraps and clamps are simpler; you just wrap or affix them around leakage, and they will hold in water until you could get the pipes replaced. Keep in mind that none of the products provide a permanent solution. Though they function as quick fixes admirably, the single foolproof method to get rid of any plumbing leak forever is replacing the pipes.
Leaking Pipe Joints
Leaking pipe joints tend to be a but trickier than the normal pipe leakages, because angle of joint can make fast repairs ineffective or awkward. Luckily, there are some tools designed mainly for administering fast fixes to vexing leakages like these. Rubber pipe connectors and Repair sleeves are enough flexible to wrap around any leaking joints, pressing in on them to squeeze water through the pipe systems.

Plumber Bothell

You will need to cut a rubber pipe connector for them to become effective, thus measurement is imperative here as well. The rubber of connector resists water in case it’s wrapped enough tightly, but it will not last forever. Likewise, repair sleeves work very well on smaller joints leaks as they clamp down with lots of pressure on the leak. However, Over time, the leak may become wider than a sleeve. In an actual pinch, you can supplement either of the tools with duct tapes, but remember how temporary this solution will be.

Cracked Porcelain
Toilets, showers, bathtubs, and sinks can break or crack just as anything else. Unlike all other, however, these appliances sometimes are filled with water completely. It’s simple to panic if bottom of the toilet cracks and begins flooding the bathroom. In the cases like this, you need to avoid the leakage from damaging your floor as soon as possible.
That is where old pal Plumber Bothell putty comes into role. Firstly, apply plumber putty to inside of the leakage. Try squeezing it in as warmly as possible. Plumber putty resists water naturally, so it must hold for quite long. After you have squeezed the putty as much as possible, you must apply caulk right on top of it. This caulk will assist form secondary seal and will last longer than the plumber putty will, however it would be difficult to put without putty. Neither the putty nor the caulk will last forever, so consider having the tub, sink, or toilet replaced if it cracks.
Regardless of how significant or minor your plumbing issue, you must get it taken complete care of promptly. The longer an issue lasts, the more damages it can carry out and the more costly it can become.

Worst Problem Cause Due To Plumbing Leaks

8/6/2018

Leaking pipes can cause lots of issues given sufficient time. The nature of the issue can change based on where the leakage is located, how harsh it’s, and how much long it goes unnoticed and untreated.
Generally speaking, longer a plumbing leakage goes unfixed, worse the issue will be. What issues can be caused due to leaking pipes?
Below is a list of the worst issues a leaking pipe can cause:
Increased Water Cost
One among the most common issues with plumbing leakage is that they could increase your water consumption. Worse a leak is, more it will cost you in the wasted water.
The lack of water and constant repeal and enactment of water restriction means that wasting your water could wind up costing you lot more—whether it is due to state-levied fines or high rates.
Fixing leakages early on could be the essential key to avoiding many months of fines as well as high water bills.
Mold
Mold thrives greatly in damp and dark environments. Leaking pipes situated behind the structure walls provide mold the ideal environment to breed for them.
There are two main reasons why it’s a major issue for business and home owners:
1. Airborne Mold Spore. Growing mold releases lots of spores in the air, producing a respiratory health issue for the people in the buildings—particularly those people who suffer from allergies or asthma.
2. Potential Structural Damages. As some molds develop, they can eat up at building material—compromising the building structural integrity.
Given sufficient time, mold growth can become enough severe to cause significant damage and harm—either to structure or the occupants.
Leaking wastewater pipes have an even more risk.

Plumber Bothell

Contaminated Water
Even leakages in pipes not inside the building can be an issue. If the pipes that carry drinking water to building has any hole in it, then dirt and other contaminants can make their way in the drinking water supplies.
This could cause serious illness or injuries.
Pest Intrusions
When the spilled water pools, then it can draw pests like termites, rodents, and ants. Once entrenched, the pests can be very difficult to remove.
Stopping the leakage early on can easily remove a vital source of nourishment, and that could help avoid an infestation. Failing down to stop the leakage early on can allow the infestation to worsen, and that leads to other issues in the future.
Why Should You Fix Plumbing Leakages?
Fixing leaking pipes sooner than later assists you to your save money by avoiding water damages to the buildings and decreasing water waste. Even more, stopping leaks promptly can reduce the risks of some mold as well as contaminated water illnesses—keeping you safe and healthy.
Look for Warning Signs?
Keep your eyes out for sign of a leaking pipe in your yard or structure. Being able to locate a leak early on can really make a great difference in the quantity of damage and waste water that occurs.
The common signs of leakage include:

  • Pools of water under exposed pipes
  • Dark spots in ceilings or walls
  • Consistently damp spot in the yard
  • Excessive growth of grass or unexpected death of grass inside the yard (poisoning or over-fertilization of turf by wastewater or water leaks)
By spotting the leakages early and repairing them immediately, you can limit your damage caused by leakage—and minimize water damages remediation costs potentially.
Do not let a leakage go unfixed in the business or home! Get it fixed promptly by calling a highly experienced Plumber Bothell right away.

Contact Us:

*

Indicates required field

Submit